2 Pin Two Way Radio Repeater Relay Box for Two Transceivers Station DIY Baofeng TYT Kenwood New
***Only for Digital Radio***
The frequency of most of the handheld walkie-talkie on the market is 400-470MHz, and the max output power is 5W which the effective talking range is about 5-8KM(only in wide-open area).
In some area such as in the city with tall buildings, the range is only 1-2 km, in some case it got only few hundred meters!
In order to realize the long-distance communication, we need repeater. But the price of normal manufacturer of repeater is very very high, so this new type repeater is just launched! The operation is very simple, it’s without power supply! And do not need to change any part of the radio. All you need is just two handheld digital radios, put the jack into the headset and the speaker mic (2.5mm & 3.5mm) with this radio repeater box, then it becomes a very practical small repeater!!
With this Radioddity SD-1 Two Way Radio Repeater Box, both of the radios can transmit and receive in VHF or UHF band.
With the development of DMR/Digital radio, like Baofeng’s DM-5R / DM-5R Plus, now we highly recommend you this new generation repeater box, specially made only for Digital walkie talkie.
The original covering material of normal repeater box is plastic, for this one, is’s alloy. Very durable and firm to use for a long time. Besides, its biggest advantage is that it is not limited by 2-pin radio. You can just change the cables to make it work for radios with other types of jack.
- The transponder downlink forwarding (differential and conventional relay station), a machine as a signal of uplink receiver, B machine as the signal downlink transmitter. Has reached the relay purposes.
- Bidirectional forwarding, machine of a receiver, B machine emission. B machine to receive, machine of an emission. To achieve bidirectional forwarding function.The relay box for audio trigger mode, when in use, the as received signal walkie talkie at full volume!
The Scope of Application:
- The link between the relay station and relay station
- Relay station signal coverage area of signal extension
- The field construction of cable erection
- Underground mine
- Cave construction
- Culvert emergency rescue
- V-U cross section relay
- Small basement and ground walkie talkie signal connection
- Large activities and other occasions emergency use!
Antenna / Diplexer Installed Applications
Unique multiplexer: two handheld computer connected to a relay station, such as the peerless multiplexer, two hand should be separately using two antenna! The two antenna should be erected vertically! And between the two of them try to distance! At least not less than 5 metres! (two walkie talkie antenna avoid parallel erection!)
A duplexer: purchase the corresponding frequency / power duplexer, with “on the joint” two handset antenna output terminal respectively docking to the duplexer transmitting and receiving end, set the players holding table corresponding frequency (frequency should be consistent with the duplexer). A duplexer case, relay station as long as the need to connect to an antenna! And erecting the antenna has no special attention! Just try to please!
Recommend using the duplexer, because a duplexer relay stations when the antenna is no special requirements! As long as the height is enough to.
Recommend the use of “original Kenwood” or “Motorola” brand walkie talkie”! As a result of the customer to use domestic non-standard walkie talkie and cause the relay box not work! Nonself at products, responsible for the consequences from customers!
Single / Two Way Relay Box Frequency Set Prompt
The one-way relay box forwarding mode (conventional relay station mode)! A machine receives the signal, the B machine transmission signal. Sending / receiving machine must be set to two different frequencies, the frequency is higher than the conventional transmitter set receiver frequency, and high / lower, high / low frequency difference of the 10M, the frequency difference is bigger is better.
The one-way relay box in the process of using the jack do not reverse connection, otherwise this trunk box will not work.
Bidirectional relay box plug does not divide the input / output, two-way relay box forwarding mode: A machine receives the B emission, B emission machine to receive A
The Matters Needing Attention
1. The relay box for audio trigger mode, so when you use the walkie talkie volume to your maximum, otherwise may appear not to send state.
2. Such as transmission delay time is too long (more than 3 seconds), conventional because walkie talkie transmit antenna near the trunk box too close to cause the transmitted signal interference caused by relay box! Can be used to solve the problem of interference of external interphone antenna!
1x Radioddity SD-2 Two Way Radio Repeater Box (Only for Digital Radio